- Minimum Order Quantity: 1 Piece
- Usage/Application:Building Waterproofing
- Packaging Type:300 ml
- Surface Of Application: Tile Adhesive
- Grade Standard: Chemical
- Strength: High
Pioneers in the industry, we offer bostik hydroment crete building chemicals, bostik flowfill grout gp2, 20l bostik lw, bostik patchfix concrete mc, bostik moisture seal epoxy water vapour barrier and bostik hydroment 5 litre 476 crete building chemicals from India.
MYK LATICRETE SUPER SET is a macromolecules based polymer concentrate liquid to be mixed with water and used with cement for installing ceramic tile, vitrified tile and natural stone using the traditional cement slurry method of installation. It is very economical and work as a great enhancer for cement slurry bonding with tiles and stones removing the need for water curing.
Packaging Details: 300 ml
Super set iwp is a single component, specially designed with polymers and additives to minimize shrinkage and reduce water permeability of cement concrete,plaster and mortar.
MYK LATICRETE SANDED GROUT ADMIX, GROUT ADMIX PLUS 1776 SERIES . It improves the performance of Portland cement grouts for all types of ceramic tile, marble, natural stone and agglomeration stone installations.
Packaging Details: 400 ML,1L,5L
MYK LATICRETE UNSANDED GROUT AND 1776 SERIES GROUT ADMIX, TERRACE JOINT, FLAT JOINT, KITCHEN FLOOR JOINT
Packaging Details: Bag
A multipurpose high polymer modified adhesive for interior and exterior installation of ceramic tiles,stone,quarry tiles,glass mosaic tiles,pavers and bricks. Laticrete 335 super flex multipurpose floor and walls tile adhesive
A high performance polymer based adhesive to be mixed with water or later for installing medium and large format ceramic tiles vitrified tiles, marble and stone on floors and walls. Combined white laticrete 73 crete admix for improved performance.
Packaging Details: 20 kg
MYK LATICRETE EPOXY FILLER POWDER, 100% solid epoxy grout suitable for ceramic tiles, vitrified tiles, marble and stone, kitchens and washroom residential and commercial installations.
Packaging Details: 1kg,5kg
PUA212:It is two component, modified polyurethane thin set adhesive with high flexibility mechanical and physical properties. Easy ro mix and use which saves time.
A factory made bagged cementitious polymer based power,containing portland cement and sillica sand,it can be mixed with water for installing small and medium size ceramic floor tiles in interior areas using tha thinset method of installation.
Use standard grouting techniques to work with MYK Laticrete Stellar Grout into tile joints. MYK Laticrete Stellar Grout can also be applied with a caulking gun. Be sure all grout joints are packed full. Remove as much excess material as possible with grout float before initial cleaning. Note: 1. Do not leave excess grout on the face of tiles.2. In case there is some unused grout material in the grout pail, make sure the lid is closed tightly so as to re-use the grout when application work starts in future course of time (within shelf life of product) Removal &Cleaning: Remove excess grout from the face of the tiles with the edge of the grout float. Hold the float at a 90°angle and pull it diagonally across the joints and tile to avoid pulling out the grout material from the joints.Initial & Final Cleaning: When Stellar Grout is used for tiles or stones, highly absorbent tiles or stones or working in high temperatures, it is recommended to do the initial cleaning when the grout is dry to touch (4 hours). Grout haze removal from the tile/ stone: After a minimum period of 4 hours of application of the grout, use Laticrete Special Stellar grout haze removing cleaner, to clean the grouted area. DO NOT USE WATER TO CLEAN THE GROUT AREA. ONLY DILUTED CLEANER SHOULD BE USED TO CLEAN THE HAZE FROM TILES / STONES.
Prepare the cleaner by diluting it with water adding 6 times of water by volume. Apply diluted haze remover (Use the cleaner after 1:6 dilution- Cleaner: water) on the surface, wait for 2 to 5 minutes allowing to soak the area completely. Use the scrubber given with the grout kit and run the scrubber in circular motion to remove the grout material, with low
Delivery Time: One day
Fixall is a rigid set, high quality cement-based adhesive suitable for most types of vitrified, ceramic, wall and floor tiles including natural stones of regular size. Fixall is also suitable for renovation of interior floor and walls. When used with Bostik's Hydroment it can fix heavier stones too
bostik Epoxy tile grout is a three component system of specially formulated epoxy resin and hardener for use in applications of ceramic tile, vitrified tile and stone.
CLENZA TC is a fast acting acid based cleaner for regular cleaning of dirt and stains on tiles surfaces. CLENZA TC is designed for daily maintenance of tiles. It is ideal for interior and exterior use.
Unglazed ceramic tile, glazed ceramic tile, vitrified tile, porcelain tile,glass tile.
CLENZA TS TAP AND SHOWER CLEANER. FREE OF HARMFUL ACIDS, PERFECT TO CLEAN STUBBORN HARD WATER , SOAP AND LIMPSCALE STAINS
MYK LATICRETE MYK TOOLS 2MM,3MM,4MM,5MM,6MM Spacer, uniform spacing between tiles, no lippage, efficient tiling, aesthetics.
MYK LATICRETE UNSANDED GROUT ALL COLOUR AVAILABLE, APPLICATIONS: Residential, commercial, external facades. It is NOT a waterproofing material for joints or surfaces.