- Minimum Order Quantity:1 Piece
- Brand:Bostik
- Usage/Application:Construction
- Color:Gray
- Type:Cement Grout, grout admixture
- Packaging Type:225 GMS
Duct grouting, bed grouting, filling cracks joining structural elements by injection and pressure grouting.
Delivery Time: One day
VT-201 All Purpose Sealant is a general acetoxy silicone sealant formulated for various sealing applications like glazing, where long term reliability is required. It will bond to form a durable, flexible, and waterproof seal on many common wet area building materials.
Delivery Time: One day
10.1. Reactivity The product is non-reactive under normal conditions of use, storage and transport. 10.2. Chemical stability Stable under normal conditions. 10.3. Possibility of hazardous reactions No dangerous reactions known under normal conditions of use. 10.4. Conditions to avoid None under recommended storage and handling conditions (see section 7). 10.5. Incompatible materials No additional information available 10.6. Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Delivery Time: One day
VT-222 is a versatile, environmentally friendly acrylic sealant for all purpose caulking and sealing applications. It is paintable and has good adhesion to most porous surfaces. It is formulated with the right consistency thus able to withstand pressure during the installation. It is suitable for sealing gaps and joints where slight movements or vibration, if occurred, could cause conventional, non-elastic fillers and putties to crack and fall off.
Delivery Time: One day
Packaging Details: VT-222 ALL PURPOSE GAP SEALANT -450GMS
PU-SC/PU-SP: Solution for sealing and fixing all kind of frames, doors or windows, filling pipe holes with maximum insulation. PU-FP: Polyurethane foam for those jobs that require higher fire resistance. PU-TP: Specific for roofing tiles fixings. PU-CL: Gun and fresh foam cleaner, application
Delivery Time: One day
VT-620 LM MS Sealant is a general-purpose sealant based on advanced MS Polymer technology. It is a single-component elastomeric sealant with excellent adhesion property on various substrates like concrete. After curing, the sealant is permanently elastic and has a movement capability of ±50%. It is able to comply with the stringent requirements of ASTM C920 as well as the SCAQMD rule 1168 (Architectural Sealant) for low VOC. Unlike polyurethane sealants, VT-620 is solvent-free and isocyanate-free; ensuring that the cured sealant will not shrink or have bubbling issues. It is also free of silicone oil, minimising building aesthetic issues caused by
Item Code: VT-620W
Production Capacity: V TECH
Delivery Time: One day
The surface to be leveled must comply with the principles of building construction and should fulfill the structural requirements. Any crack, pot holes joints etc should be properly sealed and cured. The surface to be treated should be free from all coatings dust and unsound concrete toppings and surface homogeneous mix, the properly mixed compound should be poured on to the surface and leveled by using of squeegees or broad brushes For layers less than or the same as 20 mm thick, concrete and cement screeds are to be primed with AquArm Uniprime GE / AquArm Uniprimer K, FloArm Soloplan-30M is applied as soon as the primer has dried. We recommend to allow the primer coat to completely dry out (approx. 6- 12 hours) as the absorption capacity of the surface is minimized and the flow behavior of floarm soloplan-30mm maintained.
Krytonite swelling waterstop is a synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stop water.